【Motion Sensor Function】This outdoor light has an infrared sensor for human body and light-sensitive design that only works at night. The detection angle of the outdoor lamp with motion sensor is 120°, the detection distance is 1-10m, the installation height of the outdoor lamp should be 1-3m when someone enters the detection area, the light will turn on Wandleuchte Wandleuchte automatisch auf, was efficient and energy-efficient.

Premium Light Source The wall light is equipped with 2835 premium lamp beads, colour temperature 3000-6500K, bright light 18W 2000lm, no flicker, no glare. They create a warm and romantic atmosphere while being aesthetically attractive and neighbours.

High quality: the outer lamp body is made of aluminium and the surface has been covered with multi-layer baking paint. It is sturdy and durable, not easy to rust and is easy to clean. The white lampshade is made of high-quality PC material with high temperature resistance, impact resistance, good light transmission and soft light.

Wall Light with Remote Control The wall lamp is equipped with a remote control, you can easily adjust the light brightness (10%-100%), colour temperature (3000K to 6500K), timer function (1 hour, 2 hours, 4 hours). Always-On mode and night light mode make your life very enjoyable.

IP65 Waterproof The white lampshade is equipped with a sealed waterproof rubber ring, the outdoor wall light has good IP65 water resistance and has excellent waterproofing. The outdoor lamp can be used indoors and outdoors, such as balcony, garden, entrance, living room, bedroom, kitchen, bathroom, hallway, stairs, room

【Easy to Install】 Rectangular wall light dimensions: 26 x 12.5 x 12 cm. We offer cable connectors and heat shrink tubing that can perfectly solve the problem of wiring tightness. The outdoor wall light with motion sensor comes with detailed assembly instructions and complete accessories, so you can easily mount the wall light to the wall. It is recommended to carry out the installation under the guidance of a professional.

Note: There should not be bright light within 2m around the wall light, as this will affect the operation of the motion sensor. ② After connecting the power, automatically enter the induction mode and the remote control does not work. Please press the "ON" button in the remote control field, and the remote control can be activated and used normally. ③The gap between the case and the black base is a normal appearance. Remote control without batteries.