Endon Mother and child floor lamp with an Antique finish

★★★★★4.1(1,190 ratings)4 answered questions
£55.59
Not ready to buy?Email me when it drops to

Free. One email when it drops — no account needed.

Colour:
Antique Brass
‌
£55.59
Go to Shop

Compare with similar floor lamps

Same kind, similar price and well rated — picked from our tracked prices.

More in touch floor lamps

See all

Complete the look

From modern ceiling lights uk

Our productOpusDone Partner Programme — refer a business and earn recurring monthly commission

Dimmable

Supplied with double rotary dimmer switch

Antique brass & opal glass

Bulb Type: 230W R7s tungsten (117mm) & 33W G9 clear capsule (Required)

H: 1800mm Dia: 505mm

More details

Product Description

Endon 'Rome' mother & child floor lamp finished in antique brass. A 1.8 metres tall floor lamp with powerful (300 watt maximum) top uplighter and goose neck adjustable reading arm (40w maximum). Both lights are operated by separate built-in dimmer switches located on the mid-point of the stem. This mother and child lamp requires some assembly and is supplied with all the tools required. Assembly does not require any wiring

Legal Disclaimer

Complete with dimmer 230W R7s tungsten (117mm) & 33W G9 clear capsule (bulb not included) H: 1800mm Dia: 505mm Class 1 Please note: G9 lamps of minimum 20W must be used to enable the reading lamp dimmer to function assembly required

Frequently Asked Questions

1Is the on/off switch on the base or in the middle wiith dimmer switch?

Dimmer switches operate as on/off also. No switch on lamp base.

2what bulbs does it use

R7 in the large lamp, G9 in the little one. Both are narrow, long glass bulbs. They come with the lamp however, and both are dimmable.

3How do I assemble it?

It really is quite easy to assemble. Find the instruction leaflet and check all the parts listed are there. If I were you I would put the small nuts/screws in a pot so you don't lose them. Carefully lay it out on the floor and the frame is ready to connect at about 3 to 4 points, with the electric cable already runni… see more It really is quite easy to assemble. Find the instruction leaflet and check all the parts listed are there. If I were you I would put the small nuts/screws in a pot so you don't lose them. Carefully lay it out on the floor and the frame is ready to connect at about 3 to 4 points, with the electric cable already running through it. Follow the instructions to connect the tubular frame from the bottom upwards using the correct screws if required. As far as I can remember I think some of the tubular parts screw together. I am not accomplished at DIY but achieved the assembly quite easily by myself. Hope this helps. see less

4Found large lamp bulb very difficult to replace and now does not work, smaller lamp fine. Did others experience this?

Replaced large lamp bulb no problem, have not yet replaced small one

5What's the lowest price for the Endon Mother and child floor lamp in the last 12 months?

Today's £55.59 is the lowest price we have tracked over the last 12 months.

Have a question about this product?