GOWE DIGITAL MUG SUBLIMATION MACHINE NEW CUP

III. Operation ( Printing Your customized mug)?
Step 1, Place a shaped mug, close the handle with appropriate pressure and then plug the power (the pressure can be adjusted by yourself. );?
Caution! The machine must to be protective earthling properly before operating. Avoid excessive pressure.?
Step 2, Take a digital photo Print it out on sublimation paper with sublimation ink in your printer (mirror image printing). Cut the picture size to be large as the mug surface and then put it to the sublimation coated mug by adhesive tape.?
Step 3, Setting the temperature to an appropriate (between 180¡ã C- 200¡ã C);?
Step 4, Setting appropriate time, approximate 30 seconds, the temperature rising time is 2 to 4 minutes; (varies from 30 sec. To 2 minutes. Longer time leads to darker impression)?
Step 5, Place the picture-wrapped mug, close the handle and then turn on the power, red indicator lighting;?

Caution: The size of picture should be large enough to cover the whole mug surface to avoid singe and impress.?
Step 6, The machine shall start the timer automatically and enter the status of constant temperature when the temperature rises to the setting degree;?
Step 7, Release the handle when the buzzer rings and take out the mug; Press "ENTER", stop the BUZZER.?
Get rid of the picture paper 3 seconds after the mug to be took out from the machine.?
Your customized mug is done! Very Simple?

Caution! For protecting the heating mat, place the shaped mug all the time and close the handle when the machine is not being used. Another piece of paper should be used to cover the mug surface to avoid the direct touch of the mug surface with the heating mat, when the picture is too small to cover the whole mug surface.?