TEPLOCERAMIC INFRARED HEATER PANEL BUILT IN THERMOSTAT WALL

As a standard, the heater is equipped with a bracket for mounting on the wall, it is also possible to add FREE additionally a support on wheels. Available in three different sizes and capacities, respectively (please choose from drop-down menu).

The panel is equipped with a dual-control thermostat. On it you can set the room temperature and the panel temperature separately. This means that you can limit the temperature of the panel front surface, while it will tend to gain the desired room temperature. If it is no need to limit the heating of the panel, it is recommended to set the panel temperature to the maximum mode at 95 degrees Celsius.

In standard all panels are equipped with a temperature regulator (not a programmator).

We've in stock 3 different sizes of this infrared heater, also you can add rollers for FREE (please choose from drop-down menu):

Power: 400 W / 700W / 1000W
Heating area: 8 sq.m./14sq.m./14 sq.m.
Heating volume: 20 cbm/ 35 cbm/ 50 cbm
Dimensions in mm: 800х370х15/ 1100х470х15 / 1200х570х15
Weight: 6 kg./ 10 kg./ 13 kg.
Colour: White
Installation: It is installed on a wall. There is a bracket in the complete set. Mobile support is purchased separately (please choose from drop-down menu if you need it).
Protection level: IP 54
Temperature: The temperature of the panel is adjustable 35-95 ° C. Room temperature is adjustable 5-35 ° C.
Case: Steel. 0.85 mm – 1 mm. The case is covered with a double layer of powder paint. Internal and external painting.
Control: Thermostat

Warranty is 5 years. The products have European certificates.