INMOZATA 40inch Electric Fireplace Insert Wall Mounted Electric Fire With Realistic LED Flame Effect, Crystal&Log Set, Overheat Protection, Remote&Touch Screen Control, 900/1800W (40'', Black)
- Stock : In Stock
- Product Code: B09D78KDBB
【Electric Fireplace】 ：40‘’/102cm wide electric fireplace is designed for recessed and wall mounting, made of high-quality of tempered glass and steel panel. Features realistic flame effect and 2 heat settings (900W/1800W), perfect for family room, bedroom, hotel lobby or anywhere supplemental heat and ambiance is needed. Touch screen buttons together with remote control enable convenient user experience.
【Realistic Flame Effect 】High Intensity LED lights provide bright and realistic flame effect,12 different flame colors and 5 levels brightness settings cater to your desired ambience. The ember bed has two options: logs set and crystal stones. Besides, the flame effect can be operated with or without heat for year-round use.
【Adjustable Heat Settings】：The heated air vent located on the upper front area. 2 heating modes 900W and 1800W can be adjusted accordingly for both warm and energy saving purpose. The supplemental zone heating is for up to 400 square feet. The thermostat can control the room temperature from 62°F to 82°F to suit the user's preferences. Equiped with Safety cut-off device for overheat protection.
【Remote and Touch Screen Control】: Remote and touch screen make it more convenient to control every function of electric fireplace: power switch, timer settings(1h-8h), flame color(12 color modes), flame dimmer (5 brightness modes), thermostat control(62°F-82°F) and 2 heater settings(900W&1800W).
【What Should You Know】TV can be palced above/below the electric fireplace, but recommended minimum of 12” (300mm) of space between the top/bottom of fireplace and your TV. 1 Year Guarantee, if you have any question or problem welcome to contact us freely.
Feature description
Product Description
Specifications
- Material: Tempered Glass and Steel Panel
- Installation: Wall-Mounted, Recessed into the wall
- Control: Remote Control & Touch Screen Control
- Flame Color: 12 Flame Colors
- Flame Dimmer: 5 Levels Brightness
- Embers Bed: Crystal & Logs set
- 2 Heat Settings: 900W & 1800W
- Temperature Settings: 62°F to 82°F
- Timer Setting: 1 hours to 8 hours
- Voltage: 220/240V 50hz
- Plug: UK Plug with 1.8m power cord
- Overheat Protection: Yes
- Install the fireplace below/above the TV: Yes
- Operated flame effect without heating: Yes
| | |
|---|---|---|
Modern Home Decor
| Indoor Heating In Cold Weather
| Remote Control and Touch Panel Control
|
| | |
|---|---|---|
Safety and Energy Saving
| Low Noise & Timer
| Wide ApplicationThe fireplace brings warm and comfort into the home, ideal for family room, bedroom, hotel lobby or anywhere supplemental heat and ambiance is needed. |
Recessed
Recessed Installation Steps
- STEP A. Selection a dry wall to open a hole for fireplace box.
- STEP B. Fix the three wall anchors in each side of the fireplace box according to the dimensions. Figure (B)
- STEP C. Take off the two screws in both sides of fireplace. Figure (C)
- STEP D. Have two person to take the stainless steel panel out of the fireplace box. Place it to a soft and clean place. Figure (D)
- STEP E. Have two person to move the fireplace box to the wall hole.
- If the appliance is fully recessed into the wall:
1) Use the 4 screws(provided) to lock the appliance into wall with the existing two side flanges, see Figure(E)
2) Install the media and re-install the stainless steel panel.
- STEP F. Place the front panel lock the appliance. See Figure (F)
- STEP G. Lock the front panel by 2 screws See Figure (G)
Wall Mounted
Wall Mounted Installation Steps
STEP A.Select a location that is not prone to moisture and is located at least 36”(914mm) away from combustible materials such as curtain drapes, furniture, bedding, paper, etc.
STEP B.Have two people hold the appliance against the wall to determine the final location.
STEP C.Place unit face down on a soft, non abrasive surface.Remove the bracket from the back of the unit by removing the screws.
STEP D.Mark out location, then mount the bracket(s) onto the wall using the supplied screws. This bracket MUST have the hooks facing upward and be level.
STEP E.Fasten the metal bracket at the back of fireplace with 1pc 4x8mm screw, the other end to the wall with 2pcs of Drywall anchors.
STEP F.With the wall mounting bracket installed have two people lift the appliance up and insert the two hooks on the bracket into the two slots on the back of the appliance.
STEP G.Check the appliance for stability ensuring that the bracket will not pull free from the wall.
Product details
| Brand | INMOZATA |
|---|---|
| Colour | Black-mirrored |
| Product Dimensions | 101.6 x 14 x 54.4 cm; 24 Kilograms |
| Material | Tempered Glass, Alloy Steel, Metal |
| Item Weight | 24 kg |
Customer questions and answers
- How is the fire fixed when building it into the wallI sat mine on a baton but it screws into the frame to hold it in place
- If you have the flame effect alone, is there any noise?It makes a little noise for about a minute then stops
- How noisy is it when the heat is on, is it loud enough to interfere with watching tv?It’s a little bit noisy when it first fires up. Once it’s up to temperature it’s not too bad. Most of the noise is from the fan heater blow the heating air.
- Mine blows cold air with fan noise constantly when I just want to flame effect on, is this normal or can I change it to just have the flame effectHi ours can have just light effect only with no cold air or fan noise
Related products