DIAMOND 500 CENTRAL HEATING KITCHEN PLINTH HEATER: WHITE

The Bidex 500 plinth heater is a high quality heating solution for your kitchen. Using the space under the cupboards instead of taking up precious wall area, it frees up more space to maximize your kitchen work area Connecting directly to the central heating system and fitting tidily in the plinth space under a unit or cupboard, heat is blown through a heat exchanger into the room by a low noise 2 speed fan. The fan convector automatically switches on and off with the central heating system and because it runs off the central heating system, it is much cheaper to run than electric only heaters. Also there are no worries about the build-up of dust that causes overheating in electric heaters, and the constant cleaning they require. How it works The Bidex plinth heater is easy to install and use. The unit switches itself on and off automatically when your central heating system comes on and switches off. Inside the unit is a temperature switch which when the central heating comes on and the hot water starts to circulate round the pipes, it senses the hot water and switches the fan on automatically. When the central heating is switched off or the house thermostat switches off the heating, the water in the pipes cools down and so the fan switches off. There is no need to switch this unit on and off manually. If you need more heat all you do is switch the fan to boost which will push more hot air into the room. There is also a manual override switch which allows you to switch the fan off if you do not require it Did you know Fan heaters are up to 24% more efficient than standard radiators Technical Details Heat output: Normal 896 Watt (3057BTU); Boost 1166 Watt (3979 BTU). Dimensions: Cut out - 320mm wide; 100mm high. Depth of heater (including pipes at back) - 400mm. Grille dimensions: 500mm wide; 100mm high. Additional postage fees apply for Highlands, Islands & Northern Ireland. Contact us for a quote for postage to non-Mainland UK addresses.